Measurement and Control Products for WEATHER Measurement and Control Products for WATER Measurement and Control Products for ENERGY Measurement and Control Products for MACHINES Measurement and Control Products for STRUCTURES Measurement and Control Products for EARTH
Rugged Versatility
Multipurpose datalogger for monitoring and control
 
 
 
 
Image Gallery

Technical Description

The CR1000 consists of a measurement and control module and a wiring panel. This datalogger uses an external keyboard/display and power supply. Low power consumption allows the CR1000 to operate for extended time periods on a battery recharged with a solar panel—eliminating the need for AC power. The CR1000 suspends execution when primary power  drops below 9.6 V, reducing the possibility of inaccurate measurements.

The CR1000's module measures sensors, drives direct communications and telecommunications, reduces data, controls external devices, and stores data and programs in on-board, non-volatile storage. The electronics are RF shielded and glitch protected by the sealed, stainless-steel canister. A battery-backed clock assures accurate timekeeping. The module can simultaneously provide measurement and communication functions. The on-board, BASIC-like programming language supports data processing and analysis routines.

The CR1000WP is a black, anodized aluminum wiring panel that is compatible with all CR1000 modules. The wiring panel includes switchable 12 V, redistributed analog grounds (dispersed among analog channels rather than grouped), unpluggable terminal block for 12 V connections, gas-tube spark gaps, and 12 V supply on pin 8 to power our COM-series phone modems and other peripherals. The control module easily disconnects from the wiring panel allowing field replacement without rewiring the sensors.

Originally, the standard CR1000 had 2 MB of data/program storage, and an optional version, the CR1000-4M, had 4 MB of memory. In September 2007, the standard CR1000 started having 4 MB of memory, making the CR1000-4M obsolete. Dataloggers that have a module with a serial number greater than or equal to 11832 will have a 4 MB memory. The 4 MB dataloggers will also have a sticker on the canister stating “4M Memory”.

CR1000 Specifications

  • Maximum Scan Rate: 100 Hz
  • Analog Inputs:
    16 single-ended or
    8 differential individually configured
  • Pulse Counters: 2
  • Switched Excitation Channels: 3 voltage
  • Digital Ports1:
    8 I/Os or 4 RS-232 COM2
  • Communications/Data Storage Ports:
    1 CS I/O, 1 RS-232, 1 parallel peripheral
  • Switched 12 Volt: 1
  • Input Voltage Range: ±5 Vdc
  • Analog Voltage Accuracy:
    ±(0.06% of reading + offset), 0° to 40°C
  • Analog Resolution: 0.33 µV
  • A/D Bits: 13
  • Temperature Range
    Standard: -25° to +50°C
    Extended: -55° to +85°C
  • Memory:
    2 MB Flash (operating system),
    4 MB (CPU usage, program storage, and data storage)
  • Power Requirements:
    9.6 to 16 Vdc
  • Current Drain:
    0.7 mA typical; 0.9 mA max. (sleep mode)
    1 to 16 mA typical (w/o RS-232 communication)
    17 to 28 mA typical (w/RS-232 communication)
  • Dimensions:
    23.9 x 10.2 x 6.1 cm
  • Dimensions with CFM100 or NL115 attached:
    25.2 x 10.2 x 7.1 cm
  • Weight: 1.0 kg
  • Protocols Supported: PakBus, Modbus, DNP3, FTP, HTTP, XML, POP3, SMTP, Telnet, NTCIP, NTP, SDI-12, SDM
  • CE Compliance Standards to which Conformity is Declared: IEC61326:2002
  • Warranty: 3 years


1
Certain digital ports can be used to count switch closures.

2I/O ports can be paired as transmit and receive for measuring smart serial sensors.

Related Information

Shipping Weights & Dims

Single Box Shipping Weight:
     4.1 kg

Single Box Shipping Dimensions:
     30.5 x 30.5 x 20.3 cm

Konect Global Data System

A secure data collection, archiving and display system from Campbell Scientific.

Konect Global Data Service is a brand new, subscription based way to handle data stored on a Campbell Scientific datalogger.

Newsletter Subscription