Choose your site:
Home | About Us | News & Events | Quality & Reliability | Privacy & Terms | Contact Us | Site Map
 

Network Communications for Data Loggers

Campbell Scientific offer a variety of fixed line networking interfaces. The NL100 allows a fixed IP to be assigned to the datalogger enabling direct access over the internet. The MD485 provides a multi-drop networking option using RS485 twisted pair cabling.

MD485 Multidrop Interface

MD485 Multidrop Interface for communicating with a data logger via RS-485
The MD485 is an intelligent RS-485 interface that permits a PC to address and communicate with one or more dataloggers over a distance of up to 1000 metres. This interface also supports datalogger-to-datalogger communications, callback from a remote datalogger, and PC-to-printer communications. LoggerNet software is used to initiate and control the communications link.

 
  • Connects to RS-485 networks
  • Provides three interface ports: RS-485, RS-232, CS I/O
  • Uses twisted pair cable between RS-485 links
  • Maximum cable run in a network is 1000m
  • Can be configured to handle multiple RS-485 protocols and all CSI communication modes
  • Not compatible with MD9 networks
  • Product Literature (PDF: 2 Pages 73 KB)

NL100 / NL105 Network Link Interface

Network link interface for data loggers
  • Communicate via a local area network or dedicated internal connections
  • 10baseT Ethernet peripherals communicate via TCP/IP
  • Supported by PC208W 3.2 or higher
  • Uses datalogger RS-232 or CS I/O port to communicate with a computer
  • Download NL100 data sheet (PDF: 48 KB)

Interface combines storage and Ethernet comms

NL115 interface combines storage and Ethernet comms
Ethernet interface & Compact Flash storage in ONE module?

Two of Campbell Scientific’s widely used ‘add-ons’ have been combined to provide a rugged device that connects simply to the 40-pin peripheral port on CR1000 or CR3000 loggers, offering great functionality.

The NL115 enables 10baseT Ethernet communications AND stores data on a removable CompactFlash® card. This means the datalogger is able to communicate over a local network or dedicated Internet connection via TCP/IP whilst at the same time make use of expanded memory through the use of Flash cards – also useful for transporting data and programs to and from the logger.

NL120 Ethernet Module

NL120 allows datalogger communication
Campbell Scientific's NL120 allows the datalogger to communicate over a local network or a dedicated Internet connection via TCP/IP. This includes program send and data collection which are straightforward operations which are accomplished through LoggerNet's Connect Screen.
Bookmark and Share Follow campbellsci_eu on Twitter Follow us on Facebook

Page:156,154,153,1054, 2055
© Campbell Scientific 2010Home | About Us | News & Events | Quality & Reliability | Privacy & Terms | Contact Us | Site Map