Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
File compression JamesMc 3
valve control with CR Basic Hydro_engineer 5
Loggernet 4.2.1 not recognized for update mcommelin 1
other FILECLOSE error codes and their meaning smile 1
PS100 and Gel Battery BiTFx 1
Is it possible to connect a CR300 to a NL240, a RF4xx and a SDI-12 sensor? BRCBorges 2
CR1000 with slow scan stopped (OS32.02) smile 2
senddata, tables Flavio 0
Which data logger for Nortek Vectrino profiler (ADV) and the Nortek Signature1000 (ADCP) on salty environment? Or should I stick with fanless industrial PC? Venexiano 1
A300 sharing the same control port as an SDI12 sensor Tegan 2
How to connect hall effect flow rate sensor to CR6 Haitham 1
Data transmission problem dkapaso 4
NaN for FC_QC Sharai 0
The datalogger could not compile the program. line 50. Too many parameters: -1 paddysullivan 2
Combining data tables with different intervals jarlu 3
CR310 Digital input Spol 1
Problem Connecting to NL240 over USB ACramp 0
Using command SDI12Recorder () Apafos 1
Unknown GPS Instruction for CR1000 FCarotenuto 1
monitor external battery voltage furban 4
Com111 with dyndns SebastienLisah 7
Alternative to MonitorComms() for reading in raw TCP data AHann 0
CR800 - Watchdog timer RTOS triggered - OS 31.08 AHann 0
pypak: a PakBus API written in Python dgf 8
CS460 Programming Andrew 8
Strange behaviour in CRBasic ETsz instruction hal9000 1
Set priority for receive data from dattaloguers BiTFx 1
NL115 Error LED dberdes 1
Problem with access to the most recent data using Konect HigherLench 0
Issue in dial-up GPRS connection with OS 7.0 on CR300 francesco.sabatini 0