FAQs Frequently Asked Questions About our Products and Solutions

Submit an enquiry Submit an enquiry

All FAQs (1827 total: showing 1041-1060)

What should be done if the rods of the 034B-L wind sensor are bent?
What is the power consumption of the 034B-L anemometer?
Do the vane and anemometer of the 034B-L produce analog or digital signals?
What type of pole and mounting bracket should be used to mount a 034B-L against an outside wall of a building, sticking up over the roofline?
Can the 034B-L store data?
What needs to be done to replace an existing 034A-L at a weather station with a new 034B-L?
What is the major difference between the 034B and the 03002?
If the connection can no longer be made to a data logger that is connected to a Raven XT-series modem via an RS-232 port, what might be the reason?
If the RS-232 connection between a data logger and a Raven XT-series modem works fine, but the CS I/O connection does not work, what might be the cause?
Using the RavenXTG or RavenXTV as an Internet device, is it possible to have the data logger email the data file to multiple email addresses daily?
How can the RavenXTG or RavenXTV be coded to only work for a couple hours when the data is to be sent to the server?
Can a RavenXTG be used in an application outside of the U.S.?
What configuration settings need to be made to a RavenXTG to make an AT&T network mobile-to-mobile connection?
How long does it take to deploy/install the CM120 or CM115 mast, and how many people are needed to do it?
Is it possible to use the CR1000KD to connect to remote RF stations using an RF modem and a radio?
Is it possible to network two data loggers to download data from both over a single cellular phone using a Raven XT-series modem?
Do the RavenXTV and the RavenXTG run on 12 Vdc?
Do the RavenXTV and the RavenXTG have an RS-232 DB9 connector?
Do the RavenXTV and the RavenXTG require a dipole cellular antenna?
What needs to be done to have a data table sent to an FTP server using a RavenXTV or a RavenXTG?

Previous Next