FAQs Frequently Asked Questions About our Products and Solutions

Submit an enquiry Submit an enquiry

All FAQs (1824 total: showing 1501-1520)

What are the RS-232 throughput capabilities of the CR1000 when connecting multiple serial devices?
Using a CR1000, is it possible to read the four different COM ports at different baud rates?
Can the RS-232 port on a CR1000 supply 12 Vdc power for a sensor?
What are the options for collecting data from a CR1000 over IP?
Is there an easy way to modify an existing checksum algorithm using CRBasic and a CR1000?
How many analog outputs does the CR1000 have?
How many tables can be defined for the CR1000?
Is it possible to save the datalogger binary data as a file and download it to LoggerNet before it is stored in a CSV file?
Is there a way for a CR1000 to measure a 12 Vdc voltage without an external circuit?
Can the TCP port for the CR1000 internal HTTP Web server be changed from 80 to something else?
What is the default output file format for a CR1000?
Can a network camera be connected directly to a CR1000 or CR3000?
What is the maximum input voltage that a VDIV2:1 or VDIV10:1 can handle?
What principle does the control line of the CE4 and CE8 work with? Is it a digital signal or an analog voltage?
Can a CE4 or CE8 be used as a current source, measuring the voltage drop across a resistor to calculate resistance?
Can the CE4 and CE8 be used to make measurements of a non-bridged PRT?
If a data logger is not registering any tips from a rain gage, what can be done?
What are the indicators that a tipping bucket rain gage has a faulty reed switch?
What can cause a data logger to not receive correct tipping data from a rain gage?
What are the steps to perform a field calibration check on a TB4-L, a TB4MM-L, or a CS700-L?

Previous Next