FAQs Frequently Asked Questions About our Products and Solutions

Submit an enquiry Submit an enquiry

All FAQs (1827 total: showing 1681-1700)

Can the CS10-L be used in a three-phase power situation?
Are the CR800 and CR1000 capable of being programmed through a CD100 or CR1000KD without the use of computer software?
Why do some modems work with an SC932 but not with an SC932A?
What is the difference between an SC932A and an SC932?
What is the best way to remove corrosion on the pins (inside and out) of the SC932A?
Will an SC932A provide what is needed to connect a data logger to an Ethernet cable?
Does the SC932A come with any cables?
How can an SC932A be used to directly download data from a data logger to a laptop in the field?
How many 4WPB100 modules are needed to measure the internal PRT in an NR01 or CNR4 4-way net radiometer?
What's new in VisualWeather 3.1?
Which protocol does the CR500 use to communicate with a modem?
If a CR500 is disconnected from its power source, does the data logger keep the stored data in the flash memory, or does it erase the data definitively?
Can the CR510 manual be used to answer questions regarding a CR500?
Does Loggernet 3.1 run as a service under a Windows operating system?
I have a RAS tilapia system in South Africa. I want to start with a small but expandable solution to monitor and log at least DO and temp.
I have a RAS tilapia system in South Africa. I want to start with a small but expandable solution to monitor and log at least DO and temp.
How is the oxygen level in water controlled?
If a DOS application requires bidirectional serial wireless communication with a nonintelligent data terminal, will a pair of RF401A radios work?
What is the typical range for the RF411?
Is there a shelf-life for the CS511 Dissolved Oxygen Probe?

Previous Next