All FAQs (1916 total: showing 841-860)
- Can power connectors, such as the pin (male) terminal plug that connects the battery leads to the output panel of the BPALK, be ordered?
- If LoggerNet is running on a server behind a firewall, which firewall port needs to be opened to connect to data loggers that each have a GPRS modem and a fixed IP address?
- Does the license for LoggerNet include the application in a virtualized form (App-V sequencing)?
- Does LoggerNet require local administrator rights to function?
- Can a data logger be configured to place a call to a PC running LoggerNet?
- Is there a way for LoggerNet to send an email alert if a complete data logger failure occurs?
- How can a data logger be switched out (for example, from a CR800 to a CR1000) in LoggerNet?
- Does LoggerNet anywhere indicate the battery level of the connected data logger?
- Can LoggerNet connect to a modem with a dynamic IP address?
- Is there a way to set LoggerNet to download only the last x number of hours of data?
- What TCP ports need to be opened up on a firewall to allow LoggerNet to communicate with a data logger?
- Is it possible to use a FQN (fully qualified name) instead of an IP address in the LoggerNet data logger setup?
- What might cause Windows to display a "Blue Screen of Death" when LoggerNet is running?
- Is there a document that fully explains the various commands used in data logger programs, such as parameters, parameter ranges, and default values?
- Why might the numeric and graph displays (accessed from the LoggerNet Connect screen) no longer update?
- Is it possible for LoggerNet to collect data from a data logger and then SFTP it to a server?
- If the original installation disk is missing, how can a copy of LoggerNet be transferred from one computer to another computer?
- To run LoggerNet on a Windows Server operating system, are there any performance requirements or compatibility issues to be mindful of?
- If the LoggerNet product key is lost, is there a way to retrieve this information?
- What would cause the message “table definitions out of date” to appear?
Previous
Next