FAQs Frequently Asked Questions About our Products and Solutions

When replacing a retired HMP45C-L with an HMP60-L, can the same radiation shield be used?

The HMP60-L (with the Campbell Scientific cable) cannot be used with the 41003-5 10-Plate Radiation Shield without the use of additional hardware. For more information, refer to the Compatibility information on the HMP60-L product page. The standard radiation shield for the HMP60-L is the 41303-5A.

This was helpful

FAQs Home

Similar FAQs

How can LoggerNet be upgraded to LoggerNet Admin?
What is needed to connect a sensor that is compatible with wireless sensor interfaces to a CR800, CR1000, or CR3000 in a wireless network?
Can one license of LoggerNet Remote be installed on multiple computers in a single network?
What are the different cable termination options available for Campbell Scientific sensors?
What type of field check can be done on a temperature sensor or a temperature and relative humidity sensor to determine if it is within the range of specified accuracy or if it requires calibration?
What do “serial port open failed” and “permission denied” error messages mean?
Should an SC32B be installed between the RS-232 port on a data logger and the port on a desktop PC to prevent ground loop issues?