FAQs Frequently Asked Questions About our Products and Solutions

Can dual communication modes be run on a single CR1000 using a COM320 and an NL120?

Yes. By configuring the NL120 as a CSDC device, both the NL120 and COM320 can share the same CS I/O port. The CR1000 and CR3000 are capable of multi-threading, so the NL120 and COM320 can run in parallel. For more information, refer to the NL120 Ethernet Module Instruction Manual.

This was helpful

FAQs Home

Similar FAQs

Do all NLxx Internet and IP network products require LoggerNet to be installed locally?
How much does a typical system cost?
How can LoggerNet be upgraded to LoggerNet Admin?
Can the CR800, CR850, CR1000, or CR3000 upload to an FTP site on scheduled intervals?
To communicate with a CR1000 or CR3000 by TCP/IP using an NL120 or NL240, is it necessary for the data logger to have a fixed IP address?
Is it possible for LoggerNet to collect data from a data logger and then SFTP it to a server?
The CR1000/CR3000 wiring panel shows four serial I/O ports on C1 to C8. Do these serial I/O ports provide the same functionality as the SDM-SIO4 module did on a CR10X or CR23X datalogger?