FAQs Frequently Asked Questions About our Products and Solutions

Do the inputs on the CS110 panel board have the same (or better) surge protection as the CR1000 wiring panel?

The CS110 uses the same gas discharge tubes, etc., so it provides similar surge protection as the CR1000. The ground paths are different, although both are intended to provide a good ground path through the ground lug on the wiring panel and the case ground hardware on the CS110.

FAQs Home

Search

Similar FAQs

• To communicate with a CR1000 or CR3000 by TCP/IP using an NL120 or NL240, is it necessary for the data logger to have a fixed IP address?
• How many control ports are available on a CR1000?
• If the message “Clock check started” is followed by the message “Clock check failed,” what does this mean?
• Can the CR1000 measure 4 to 20 mA signals?
• If a device or sensor is not available for selection in the Short Cut program, how can it be added?
• What is the TDF file?
• To connect the HMP155A-L to a CR800 or CR1000, should a differential or single-ended channel be used?