Training Courses

Training courses are a great way to get to know your Campbell product. Whether you are a beginner or a more advanced user our training courses offer something for everyone.

Our courses are designed to enable you to get the most out of your Campbell product, helping you understand and apply the core concepts relating to programming and communicating to and from sensors and systems with a Campbell datalogger.

Combining theoretical discussion with practical hands on programming, you will be able to apply your new found skills in real world scenarios in the safety of a classroom.

Courses follow a standard syllabus but can be customised depending on requirements. Attendees are encouraged to bring along any sensors or dataloggers that are proving problematic to programme offsite so they can be worked on in the classroom. If you have specific training needs, please contact us.

You can download the training flyer for more information.

We currently offer two 2-day training courses suitable for users of CR200, CR300, CR6, CR800, CR1000 or CR3000 data loggers:

Datalogger Programming in CRBasic

This course provides an introduction and overview of how to use LoggerNet software to administer, program and collect data from Campbell dataloggers, you will also learn how to customise a program to suit your specific needs.

Datalogger Communications Course

This course will provide instruction on how to connect your Campbell datalogger to a communications network. The course covers cell phone modems, ethernet networks and spread spectrum radios, how to connect them to the datalogger and how to program for these devices to provide information over services such as email, FTP and SMS.

This course is designed for those people with some prior experience of programming Campbell dataloggers so you’ll either be a prior Campbell user or have attended the Datalogger Programming in CRBasic course and had time to practise.

Location

All courses are held at Campbell’s European HQ in Shepshed, conveniently located close to East Midlands Airport, the M1 and mainline railway stations. It may be possible to hold training in other locations or on your own premises, please contact us for details.

Whilst travel and accommodation is not included in the course fee, we are happy to provide advice on where to stay with options to suit a range of budgets.

Cost

For prices please contact us. Discounts of up to 50% are available for multiple delegates from the same company on the same course or where a delegate books on two consecutively running courses.

All courses come with lunch and refreshments throughout the day and all training materials.

Available Training Courses

January

7

Datalogger Programming in CRBasic - Two Day Course

January 7-8, 2019 | Shepshed, LE12 9GX, UK

This two day introductory training course will teach you the fundamentals of programming Campbell Scientific dataloggers, specifically the CR1000, CR300 and CR6 series of table based dataloggers using LoggerNet with...read more

Full


9

Datalogger Communications - Two Day Course

January 9-10, 2019 | Shepshed, LE12 9GX, UK

The two-day communications course is designed for experienced users of Campbell dataloggers wanting to learn how to program for, and connect their dataloggers to, various communication networks via a number...read more

Register (3 Seats Available)

April

1

Datalogger Programming in CRBasic - Two Day Course April 2019

April 1-2, 2019 | Shepshed, LE12 9GX, UK

This two day introductory training course will teach you the fundamentals of programming Campbell Scientific dataloggers, specifically the CR1000, CR300 and CR6 series of table based dataloggers using LoggerNet with...read more

Register (5 Seats Available)


3

Datalogger Communications - Two Day Course April 2019

April 3-4, 2019 | Shepshed, LE12 9GX, UK

The two-day communications course is designed for experienced users of Campbell dataloggers wanting to learn how to program for, and connect their dataloggers to, various communication networks via a number...read more

Register (6 Seats Available)

May

13

Datalogger Programming in CRBasic - Two Day Course May 2019

May 13-14, 2019 | Shepshed, LE12 9GX, UK

This two day introductory training course will teach you the fundamentals of programming Campbell Scientific dataloggers, specifically the CR1000, CR300 and CR6 series of table based dataloggers using LoggerNet with...read more

Register (6 Seats Available)


15

Datalogger Communications - Two Day Course May 2019

May 15-16, 2019 | Shepshed, LE12 9GX, UK

The two-day communications course is designed for experienced users of Campbell dataloggers wanting to learn how to program for, and connect their dataloggers to, various communication networks via a number...read more

Register (6 Seats Available)

June

24

Datalogger Programming in CRBasic - Two Day Course June 2019

June 24-25, 2019 | Shepshed, LE12 9GX, UK

This two day introductory training course will teach you the fundamentals of programming Campbell Scientific dataloggers, specifically the CR1000, CR300 and CR6 series of table based dataloggers using LoggerNet with...read more

Register (6 Seats Available)


26

Datalogger Communications - Two Day Course June 2019

June 26-27, 2019 | Shepshed, LE12 9GX, UK

The two-day communications course is designed for experienced users of Campbell dataloggers wanting to learn how to program for, and connect their dataloggers to, various communication networks via a number...read more

Register (6 Seats Available)

August

5

Datalogger Programming in CRBasic - Two Day Course August 2019

August 5-6, 2019 | Shepshed, LE12 9GX, UK

This two day introductory training course will teach you the fundamentals of programming Campbell Scientific dataloggers, specifically the CR1000, CR300 and CR6 series of table based dataloggers using LoggerNet with...read more

Register (6 Seats Available)


7

Datalogger Communications - Two Day Course August 2019

August 7-8, 2019 | Shepshed, LE12 9GX, UK

The two-day communications course is designed for experienced users of Campbell dataloggers wanting to learn how to program for, and connect their dataloggers to, various communication networks via a number...read more

Register (6 Seats Available)

September

16

Datalogger Programming in CRBasic - Two Day Course Sept 2019

September 16-17, 2019 | Shepshed, LE12 9GX, UK

This two day introductory training course will teach you the fundamentals of programming Campbell Scientific dataloggers, specifically the CR1000, CR300 and CR6 series of table based dataloggers using LoggerNet with...read more

Register (6 Seats Available)


18

Datalogger Communications - Two Day Course Sept 2019

September 18-19, 2019 | Shepshed, LE12 9GX, UK

The two-day communications course is designed for experienced users of Campbell dataloggers wanting to learn how to program for, and connect their dataloggers to, various communication networks via a number...read more

Register (6 Seats Available)

October

28

Datalogger Programming in CRBasic - Two Day Course Oct 2019

October 28-29, 2019 | Shepshed, LE12 9GX, UK

This two day introductory training course will teach you the fundamentals of programming Campbell Scientific dataloggers, specifically the CR1000, CR300 and CR6 series of table based dataloggers using LoggerNet with...read more

Register (6 Seats Available)


30

Datalogger Communications - Two Day Course October 2019

October 30-31, 2019 | Shepshed, LE12 9GX, UK

The two-day communications course is designed for experienced users of Campbell dataloggers wanting to learn how to program for, and connect their dataloggers to, various communication networks via a number...read more

Register (6 Seats Available)

December

9

Datalogger Programming in CRBasic - Two Day Course Dec 2019

December 9-10, 2019 | Shepshed, LE12 9GX, UK

This two day introductory training course will teach you the fundamentals of programming Campbell Scientific dataloggers, specifically the CR1000, CR300 and CR6 series of table based dataloggers using LoggerNet with...read more

Register (6 Seats Available)


11

Datalogger Communications - Two Day Course December 2019

December 11-12, 2019 | Shepshed, LE12 9GX, UK

The two-day communications course is designed for experienced users of Campbell dataloggers wanting to learn how to program for, and connect their dataloggers to, various communication networks via a number...read more

Register (6 Seats Available)