Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

COM220 modem & RS232 port

Spyros Apr 5, 2018 06:11 AM

I am trying to use a COM220 modem with a CR300 D/L (or RS232 port of a CR1000),but until now i have no success.

Has anyone else try this?

GaryTRoberts Apr 5, 2018 06:24 AM

Sorry Spyros, the COM220 does not work with the CR300. On the CR1000, you will need to connect the COM220 to the datalogger using the CR1000's CS I/O port instead of the RS232 port.

See section 3 of the COM220 manual for details (https://s.campbellsci.com/documents/us/manuals/com220.pdf).

* Last updated by: GaryTRoberts on 4/5/18 @ 6:26 AM *
Spyros Apr 5, 2018 06:43 AM

Dear Gary,

i know i can connect it to CS I/O port of Dataloggers.

I was meaning to connect COM220 with RS232 port using an interface e.g. SC105.

Is this possible?

Thanks in advance

GaryTRoberts Apr 5, 2018 03:19 PM

No. It is not possible.

Log in or register to post/reply in the forum.