Hi there,
Cannot connect to Vaisala WXT536 weather station,
throuhg USB it is fine but throuhg the CR6 we cannot even connect via terminal mode,
any advice would be great thank you
Hi,
i have a WXT520 with CR1000X.
CRBasic:
==========================
Public WXT520(7)
...
SDI12Recorder (WXT520(1),C5,0,"R!",1.0,0)
==========================
How Is the WXT sensor configured?
Address?
Protocol SDI-12?
Continuos measurments activated?
User port settings SDI-12?
The port CR6 should be U5 (?)
thanks for your reply, running of addres12 have got it running in U3 at this stage along with some other sensors.
realised that both Tx and Rx have to be combined into the com port, have never had a sd12 that requires this.
have resolved issure for now. but am welcome to any advice.
how have you found continuous monitoring? good/bad?