Hi,
I want to save raw data (u, v, w, Ts, and kh_mV) being kh_mv from KH20 krypton hygromter. Data will be collected with a CR1000 at 10 Hz frequency. All raw data at every 30-min will be saved as a single file. Then I will use EddyPro to process the data. But EddyPro requires the file name to have a timestamp format like: yyyy-dd-mm_HHMM.
My question is: Is it possible to instruct CR1000 code to have the files saved in that format? I will use a flash card to save the files.
Hope someone will help me on this!