Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.

Log in or register to post/reply in the forum.

Remote OS update via Connect screen

ariklee Jul 31, 2020 10:11 PM

I've updated OS on many CR300 and several CR6 and CR1000X remotely via the Connect screen. However, today I was sending (to a client) the Campbell instruction video on how to do this, and I noticed the warning on the video:

IMPORTANT: This video does NOT apply to CR6 dataloggers with a serial number greater than 7501, the CR300, or the CR1000X.


Seems to work just fine over cell modem. Is that disclaimer/warning old? Thanks,


JDavis Aug 3, 2020 08:50 AM

What is different is the newer dataloggers should start the previous program after an OS update. A CR1000 would need a program called default sent to it first, otherwise it would sit with no program running.

Log in or register to post/reply in the forum.