Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

CR1000X Datalogger - Posting Data to Server using Ethernet

Shreeshant Dec 15, 2020 11:45 AM

Hi!

I am new to his datalogger and i am trying to post the data from the logger to our server using FTP. Can any help me with the starting procedure? 

nsw Dec 17, 2020 12:20 PM

Hi,

There are some useful videaos/blogs/Technical notes which can help you. The first is on connecting your datalogger to an Ethernet network:-

Datalogger Ethernet Configuration: Getting ready for communication (campbellsci.co.uk)

Second, once your datalogger is resgistered and has a network connection, there is a helpfl Technical Note on streaming data from a table to an FTP server here :-

FTP Streaming (campbellsci.com)

Hopefully these should get you started.

Shreeshant Dec 17, 2020 12:34 PM

Hi!

I was able to stream the Data using FTP to our server for a start. Thanks for the links. I will check them out. Need to learn more about it.

Cheers!

Log in or register to post/reply in the forum.