Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

AM16/32 Mutiplexer programming


draffard Oct 2, 2014 09:24 AM

Hello,

I am trying to program a AM16/32 Multiplexer in 4x16 mode to mesure 12 potentiometer sensors (3 wires), with a CR1000 campbell logger (I used the wiring given in the AM16/32 manual page 27).

I tryed to use the wizard to program it, the multiplexer does not have an option for selecting Brhalf connections (with excitation), and the manual is not that easy to follow as there are no programming examples.


Is there an example script for programming AM16/32B in 4x16 mode for potentiometer or half bridge measurement with exitations ?

Thanks per advance,


TJones Jan 14, 2019 12:40 AM

I am now running into the same problem. Would love any advice you ended up with - I know it was a long time ago!

Thanks.

Log in or register to post/reply in the forum.