Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
How to connect Thies Ultrasonic 2D on CR1000 sonerharnuboglu 1
DataTables are not shown marciopf 4
Emailsend, EmailRealy CR300-cell200 Alfred 2
NAN avec CDM_BrHalf4W hedde 0
Programming a CR1000X with two AM16/32 multiplexers and 32 full birdge load cells joelon 2
Data tables missing lines MattL 0
Maestro M100 3G modem connection via COM1 port of a CR1000 MAINASSARA 0
Time of MaxRun ccowin 4
Loggerlink and Bluetooth 4 ronlootensVU 4
Maintenance cr1000 kokihualpa 1
TableFile CRJSON (16, 17, 18) ggrewe 0
CR1000X fixed ip adress "hidden" on local network Julien_Ecofilae 2
sampling 2 COM ports at different rates pfjessen 0
variable out of bounds #RD@2020 3
control SW12-1 on CR1000X fdeclercq 6
Ftp Makada 3
parameter must be a constant integer ''SerialOpen (Com2, DSI_Baud, DSI_ComMode, 0, DSI_RxBufSz*8)'' #RD@2020 0
4CR1000X vs 1CR1000x + 2CDM-A116 chalit 0
CR800 datalogger with telit kt863p6 gsm terminal cannot send files over ftpclient miko 0
possiblity to send data via HTTP Post Arno 4
Does the CR6 datalogger support HTTP digest authentication? Kael_BTS 0
Hop Frequencies Norwester 4
Convert TOB3 file to time-baled TOB1 yyk 2
Send email using gmail RelayEmail quiqueapolo 2
Connecting CS650 with Arduino Muhammad Muzzamil 0
Troubles with COM111 quiqueapolo 27
Live timestamp Makada 0
Batchfile to turn on high freq data collection durning an event Kevin 1
CS107/108 temp sensor physical design weatherguy 1
Problem about use CR6 to recive UDP broadcast data Kael_BTS 2