Ethernet connectivity and expanded data storage capacity are easily added to a CR1000 or CR3000 by attaching an NL116. The Ethernet connection provides access to the powerful Internet capabilities of the data logger for data collection and control. Additionally, gigabytes of data and file storage capacity can be added to the data logger using a removable CompactFlash card.Read More
One Type I or Type II (CF) card fits into the NL116’s card slot. Campbell Scientific offers and recommends the CFMC256M, CFMC2G, and CFMC16G CF cards (see Ordering Information). Only industrial-grade CF cards should be used with our products. Although consumer-grade cards cost less than industrial-grade cards, the consumer-grade cards are more susceptible to failure, resulting in both the loss of the card and its stored data. Industrial-grade cards also function over wider temperature ranges and have longer life spans than consumer-grade cards.
The NL116/CF card combination can be used to expand the data logger’s memory, transport data/programs from the field site(s) to the office, and upload power up functions. The computer can read the CF card with the computer’s USB port and the 17752 Reader/Writer.
|Transmission Distance or Area||Worldwide|
|Storage Capacity||256 MB, 2 GB, or 16 GB|
|Data Logger Interface||40-pin peripheral port on CR1000 or CR3000|
|Ethernet||10/100 Mbps, auto-detect 10BaseT/100Base-TX, full/half duplex, IEEE 802.3, auto MDI/MDI-X|
|CompactFlash Cards||Campbell Scientific recommends industrial-rated cards.|
|Power Source||12 V from data logger 40-pin peripheral port|
|Power Consumption||58 mA typical, 3 mA Ethernet off|
|Service Requirements||Ethernet access|
|Dimensions||10.2 x 8.9 x 6.4 cm (4.0 x 3.5 x 2.5 in.)|
|Weight||154 g (5.4 oz)|
|Application of Council Directive(s)||2004/108/EC Electromagnetic Compatibility Directive (EMC)|
|Product Standard||EN 61326-1:2013 – Electrical Equipment for measurement, control and laboratory use (EMC requirements – for use in industrial locations)|
|2011/65/EU||The Restriction of Hazardous Substances Directive (RoHS2)|
A CR1000 or CR3000 datalogger using operating system version 28 or greater is required.
Number of FAQs related to NL116: 2
The maximum recommended segment length (length of cable between the NL device and the Ethernet repeater, hub, switch, or router it is connected to) for 10Base-T and 100Base-Tx networks using CAT5e cable is 100 m.
The NL116 is the same as the NL121, with the addition of a CompactFlash card slot that can be used with a removable CompactFlash card to extend data storage and data collection.