Subscribe

Subscribe to receive email notifications when new videos are posted.

Displaying 1 to 8 of 8
Sort by
 

Built-in Web Interface

The CR6, CR1000X and CR300-series dataloggers feature an embedded web interface allowing access to real-time and stored data. Additionally, you...

(2:59) Uploaded: 11/16/2017


Ethernet over USB

After installing Microsoft’s RNDIS driver, you can connect to your CR6, CR1000X or CR300-series dataloggers through a virtual Ethernet link....

(2:11) Uploaded: 11/16/2017


CR300 Series Wi-Fi QuickStart

Quickly set up Wi-Fi communications with a CR300-series datalogger. This tutorial will get you started with examples to either create...

Uploaded: 2/3/2017


EZSetup Ethernet Connection

Use the EZSetup wizard to set up IP communication between the computer and datalogger.

(2:02) Uploaded: 1/10/2017


Datalogger Ethernet Configuration

Use the Device Configuration Utility to enter the datalogger static IP Address, Subnet Mask, and IP Gateway address. (A static...

(2:54) Uploaded: 1/10/2017


RF Communication QuickStart

Quickly set up radio communications with a CR300-series datalogger. This tutorial will get you started with several example networks: Example...

Uploaded: 11/7/2016


CR310 Ethernet QuickStart

You've followed the QuickStart steps to get your CR310 datalogger communicating over USB and programmed to take measurements. Now set...

Uploaded: 11/7/2016


Cellular Modems | Troubleshooting

A troubleshooting guide to resolve some issues encountered with cellular modems. Topics covered include connection issues, error codes, hardware, signal...

(15:29) Uploaded: 6/25/2014