CM225 Solar Sensor Mounting Stand

Overview

The stainless-steel CM225 attaches one pyranometer or quantum sensor to a mast, crossarm, or pole (1 to 2 in. OD). Many pyranometers and quantum sensors also require a leveling base that secures the sensor to the CM225 as well as level the sensor.

The CM225 consists of a rectangular plate, mounting bracket, U-bolts, lock washers, and nuts.

Images

CM225 attached to a CM200-series crossarm (sold separately)
CM225 with an LI190R-L quantum sensor (sold separately)
CM225 with an LI200RX-L pyranometer (sold separately)
CM225 with an LI200RX-L pyranometer (sold separately)

Specifications

Why/When to Use Used when the pyranometer only needs to be mounted in a horizontal position. It is also typically used with a crossarm.
Material 12 gage, 304 stainless steel
Dimensions 8.9 x 11.3 x 6.4 cm (3.5 x 4.5 x 2.5 in.)
Weight 0.34 kg (0.75 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Sensors

Product Compatible Note
CMP11 Assumes the CMP11 is not housed in the CVF4 Heater/Ventilation Unit.
CMP21 Assumes the CMP21 is not housed in the CVF4 Heater/Ventilation Unit.
CMP6 Assumes the CMP6 is not housed in the CVF4 Heater/Ventilation Unit.
CS300 (retired) Requires the 18356 Leveling Base.
LI200R Requires the LI2003S Leveling Base.

Mounting Equipment

Product Compatible Note
CM106 (retired)
CM106BE Tripod
CM110
CM115
CM120
CM202
CM204
CM206

Additional Compatibility Information

Mast or Vertical Pole

The U-bolt and V-block use the bracket's side holes to attach to a tripod or tower mast or to a user-supplied vertical pole.

User-Supplied Vertical Pole

The CM225 can mount to a 0.75 to 1.5 in. pipe size (1 to 2 in. OD).


Articles and Press Releases