SDMS40 Multipoint Scanning Snowfall Sensor
Detects Onset of Snowfall and Snowmelt
Proven performance and field tested
weather applications supported water applications supported energy applications supported gas flux & turbulence applications supported infrastructure applications supported soil applications supported


The SDMS40 is a powerful and cost-effective 2D multipoint, laser-based snowfall sensor. In the past, multipoint laser-based snow depth sensors have typically been complex and costly, so the practical SDMS40 was developed to address those issues. Performance and reliability of the device have been proven with thorough testing of the sensor and its measurement method. (Read the white paper.) With the SDMS40, you can enjoy accurate data from a compact, automated, multipoint scanning laser snow depth sensor at a reasonable price.

The ability to quickly and reliably detect the onset of snowfall and snowmelt is a highly sought-after feature in a snow depth sensor, and the SDMS40 does not disappoint. It is one of a few laser sensor models available in the world that can reliably detect the onset of snowfall and snowmelt, and of all the models available, the SDMS40 is the most cost-effective. Campbell Scientific prides itself on the high quality and accuracy of its products. We won't put our stamp of approval on anything that does not meet our expectations or the needs of our customers, and we want to ensure you can trust the quality and accuracy of the SDMS40 like you would trust any Campbell system. So we field tested the SDMS line of snow sensors over three Canadian winter seasons. It has proven itself to be practical, accurate, and of excellent quality.

Benefits and Features

  • Detects the onset of snowfall or snowmelt quickly and reliably
  • Proven performance by field tests over three winter seasons from 2013 to 2015
  • Allows easy installation on poles, building walls, or any structure
  • Can be used as an additional gauge to existing weather stations
  • Compact and light gauge structure
  • Less sensitive to ground conditions
  • Filters out noise input caused by obstacles and abnormal situations
  • Can operate on natural ground and different types of snow plates


SDMS40 with SDMS40CBL replacement cable (sold separately)



Target Area Diameter 30 cm – 200 cm depending on installation height
Beam Half-Angle 7.5°
Snow Depth Measurement Method Multipoint laser scanning
Number of scanning points 36
Ground target available as an option
Range 1-5 meters
Gauge Pointing Angle 0 to 45°
Accuracy ±3 mm
Resolution 1 mm
Operational Temperature Range -40 to 50°C
Power Supply Requirements 12-15 VDC, 2 A
Enclosure Classification IP68
Laser Classification 2
Dimensions 12cm x 28cm x 10cm
Weight approx. 1.8kg
RoHS Compliant

Current Draw

Standby 50 mA
During Measurement 300 mA
During Measurement with Heater 360 mA
Heater B 1.2 A


Communication Interfaces RS-232, RS-485, SDI-12
Maximum Baud Rate 57.6 (RS-232 and RS-485)


Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.


Product Compatible Note

Resources and Links


SDMS40 Firmware Update v.7.0e (810 KB) 13-12-2017