Displaying 1 - 10 of 10 articles tagged with: LoggerNet
Author: Jason Ritter | Last Updated: 02/27/2019 | Comments: 0
Have you ever wanted Short Cut to support more sensors? Although Short Cut supports many sensors, you may have found that the sensor you want to measure is not on the list. What do you do then? How do you add that sensor to your... read more
Author: Dana Worley | Last Updated: 07/19/2017 | Comments: 0
In an April 2016 blog article (“Handling New Device Drivers in a Changing Windows World”), I wrote that Campbell Scientific was ending Windows XP support for our hardware device drivers. In that article, I also mentioned that Windows XP support might end for other products... read more
Author: Dana Worley | Last Updated: 04/05/2017 | Comments: 0
IP communication has significantly changed the way many of us access our data loggers. It is reliable, fast, and readily available—anywhere you have access to "the Internet," you have the ability to use this protocol to communicate with your data logger.
Sometimes, however, network access to... read more
Author: Jacob Davis | Last Updated: 02/22/2017 | Comments: 2
Have you come across situations where you want your data logger to initiate data retrieval, rather than your PC? For example, do you have an environmental condition that you want to transmit alarm data for?
Although IP-based communication is prevalent, sometimes you may need data-logger-initiated communication... read more
Author: Janet Albers | Last Updated: 11/30/2016 | Comments: 0
If you use Campbell Scientific data logger support software to connect to your data logger, you may monitor your data from within the software. Have there been times when you’ve seen “Undefined” or “N/A” instead of your data values? What does that mean, and how... read more
Author: Dana Worley | Last Updated: 04/27/2016 | Comments: 0
We've all been there. You open the box for some new toy such as a camera, printer, or even a data logger, and before you can get started, you are required to install a device driver. The device driver loads files onto your computer so... read more
Author: Dana Worley | Last Updated: 04/13/2016 | Comments: 0
You may find it a little confusing to differentiate between software upgrades and patches. For example, when do you need which one? When is there a fee for a software release, and when is a release free of charge?
With the recent release of the new... read more
Author: Dana Worley | Last Updated: 02/03/2016 | Comments: 2
We’ve recently had an exciting new addition to our family of LoggerNet datalogger support software. In this brief article, I’ll introduce you to this mobile app and tell you how you can get it free of charge.
You are probably familiar with LoggerNet, our PC-based software... read more
Author: Paul Smart | Last Updated: 01/20/2016 | Comments: 0
Have you heard of DNP3 but been unsure of what it is or what it’s used for? In this brief article, I’ll introduce you to this communications protocol, its role in SCADA applications, and how you can use it with your Campbell Scientific equipment and... read more
Author: Dana Worley | Last Updated: 11/18/2015 | Comments: 0
When you have work to do, there’s nothing more frustrating than being unable to connect to your data logger in the field. We’ve all been there: You’re in LoggerNet’s Connect window pressing the Connect button, and you’re met with nothing but the endless flashing “connecting... read more