Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
The best solution to implement a measurement cycle with two parts. tomasafonso 3
MLX90614 i2c sensor to CR1000x Yuvash 3
4-20mA circuit issue Pscamm 2
Sending email and text messages Michael Lily 1
KonectGDS MatiasFernandez1422 0
Problem communication between CR1000 and PC SangNguyen 3
Unable to access CR1000X due to failed program Daniwenz 7
How to read TTL output vk 4
PulsePort on CR6 using U ports Monte 3
Scheduled collection every X seconds and new filename every X hours gcauble 5
MQTT Publish Table with CR310 niko 1
PC-TDR/TDR200 "NAN" for VWC? andrean 2
Skipped Scans using SDI-12 with CR6 at 1-Second Scan Interval dbrese_stone-env 7
Connection issues after uploading new program stb3 5
logging of seperate power rail cellectronic 3
Rush Scan (CR310) Nichol 3
SETVALUEEX request over https richaus 2
Forced to keep off-line","opening not permitted Abraim 8
Data synchronization between ATI-K sonic anemometer and LI7500A vk 8
program example for Vaisala GMP343 furban 6
Slow FTPS send Giancarlo Tamburello 0
EasyFlux PC errors minhhoang 2
How to integerate logger net with CR1000x to have remote access to the datalogger. SamuelPius 3
CR300 auto data extraction / monitoring benocd 4
Modification of program code for readings (not records) of CR dataloggers for critical energy systems c.pablonicolas 2
CRBasic: Comment and Uncomment MortenS 7
Voltage measurement with CR1000 24-36V DC Mpunktp 3
CR6-RF407 link quality much worse than CR6 with external RF407 and same settings sigfig97 4
Maximum of sensor in one SDI-12 Chakir 4
Problems with protocol conversion AFOskar 11