The TempVue™10 represents the next generation of air-temperature measurement sensors, meeting all relevant World Meteorological Organization (WMO) temperature recommendations.
Designed with the customer in mind, the TempVue 10 easily interfaces with Campbell Scientific or third-party data loggers and fits a wide range of passive solar radiation shields. The sensor comes with a short, attached cable and terminates with an M12 connector, which provides exceptional convenience, environmental protection, and data integrity for use in a variety of applications.Read More
The sensor consists of a wire-wrapped, four-wire Pt100 Resistance Temperature Detector (RTD) element encapsulated in an epoxy-filled, stainless-steel housing. The thin yet robust housing, combined with the Pt100 sensing element, provide the first true WMO-compliant sensor to meet the 20-second step response time with an ambient wind speed of only 1 m/s (3.3 ft/s).
The TempVue 10 has a maximum measurement uncertainty of only 0.3 Kelvin over the entire measurement range of -80° to +60°C, with only 0.1 Kelvin over the most common temperature range of -40° to +40°C.
|Sensor Description||Platinum Resistance Thermometer (Pt100)|
|Temperature Measurement Range||-80° to +60°C (-112° to +140°F)|
|Time Constant in Air||20 s for a wind speed of 1 m/s (3.3 ft/s)|
|Resolution||Three decimal places (0.001°C)|
|Connector Type||M12 (to extend beyond 1 m [3 ft] standard cable length)|
|Probe Diameter||1.9 cm (0.75 in.) maximum|
|Probe Length||12.1 cm (4.75 in.) tip to end of cable gland|
|Extended Probe Length||18.1 cm (7.125 in.) tip to end of extender piece|
|Total Length||97.16 cm (38.25 in.) tip to end of connector|
|Weight||70 g (0.15 lb) for probe with extender piece, including standard 1 m (3 ft) cable with M12 connector|