Current Version: 4.5
PC400 is Campbell Scientific's mid-level data logger support software. This versatile software supports a variety of telecommunication options, manual data collection, and data display. PC400 includes an easy-to-use program generator (Short Cut), as well as full-featured program editors (CRBasic, Edlog).Read More
To facilitate station setup, PC400 provides the EZSetup Wizard. This simple, station-oriented wizard walks the user through the setup process. The wizard can also be used to modify settings for an existing site.
These tools allow customers to set/edit the station’s settings, set the datalogger’s clock, view real-time data, set flags/ports, and collect data on demand. Communication links supported include direct connect, phone modems, Ethernet, narrow-band UHF and VHF radios, spread spectrum radios, or multidrop modems.
PC400 offers two full-featured programming tools—the CRBasic Editor and Edlog. The CRBasic Editor (similar in syntax to the BASIC programming language) supports our newer dataloggers. Edlog supports our retired dataloggers and the CR7.
For those who prefer a simpler means of programming their dataloggers, PC400 includes Short Cut for Windows (SCWin). SCWin can generate a program for any of our dataloggers and supports all of our popular sensors, as well as user-created custom sensor files (using an existing sensor file as the starting point). Short Cut can also be used for the ET107, ET106, and MetData1 Weather Stations.
View Pro allows data from a data file to be viewed in a numeric format, or in one of several graphical formats, including a line graph, X/Y plot, histogram, rainflow histogram, or FFT. Multiple data files can be opened at once, allowing side-by-side comparison of the data. The graphs can be saved in a variety of formats. The left and right y-axes of the graphs can be configured independently.
DevConfig allows you to send new operating systems to dataloggers and other devices with flash memory, configure various PakBus settings in dataloggers, and edit settings for communication peripherals such as the NL240 and RF401A.
CardConvert is used to convert and save binary data from a PC Card, CompactFlash card, or microSD card. PC Cards are compatible with our CR5000 and CR9000X dataloggers. CompactFlash cards are compatible with our CR1000, CR3000, CR5000, and CR9000X dataloggers. MicroSD cards are compatible with our CR6 datalogger.
Split is used to post-process data files and create reports. It sorts and combines data based on time or conditions, performs calculations on data values, converts “Day of Year” calendar dates into more traditional date/time stamps and allows variable column widths for printable reports.
|Operating System||Windows 10, 8, or 7|
|Requirement||TCP/IP services must be installed and enabled on the PC.|
|Software Level||Entry to intermediate|
|Communications Supported||Direct connect, Ethernet, short-haul, phone modems (land-line, cellular, voice synthesized), RF transceivers (UHF, VHF, and spread spectrum), multidrop modems|
|Scheduled Data Collection Supported||No|
|Data Display Supported||Numeric, simple, line graph|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
TCP/IP services must be running on the computer.
PC400 does not support combined communication options (for example, phone-to-RF), PakBus routing, or scheduled data collection. LoggerNet software is recommended for applications that require those capabilities.
Required computer operating system—Windows 7, 8, or 10
PC400 is compatible with the mixed array, PakBus, and TD data logger operating systems for the CR510, CR10X, and CR23X dataloggers.
PC400 supports most commerically available sensors, SDM devices, multiplexers, relays, vibrating-wire interfaces, ET107, CompactFlash cards,microSD cards, and PC cards.
Upgrade PC400 version 4.0 and newer to 4.5; no intermediate steps are required.
PC400 must be installed on your computer.
Supported Operating Systems: (32 and 64 bit) Windows 10, 8.1, 8 or 7.
A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.
Supported Operating Systems:
Windows 10, 8.1, 8, and 7 (Both 32 and 64 bit)
Number of FAQs related to PC400: 22
Expand AllCollapse All
When using PC400 to connect to a data logger on an RS-232 port, the baud rate must be matched. This is done through the PC400 data logger settings.
No. However, real-time data can be displayed in tabular form in the Monitor Data tab.
The available COM ports listed in the COM Port drop-down menu are supplied to PC400 by the Windows Operating System (OS). If there are no COM ports shown for selection, it most likely means that there are no COM ports registered with the Windows OS. This can be confirmed using the Windows Device Manager (Control Panel | Device Manager | Ports).
Most modern laptops are not equipped with native RS-232 COM ports. In this situation, a USB-to-RS-232 adapter cable must be used to connect to the data logger. Even when the drivers for this device have been properly installed, the derived COM port will not be shown for selection until the cable is attached to the laptop.
LoggerNet and PC400 have a program named Split that enables selection of records and mathematical calculations on data values in a data file. The program is especially useful in isolating data records of interest from data files from array-based data loggers where several different types of records may be stored in the same file.
Note that the version of Split in PC200W is a different application. Its only function is to separate each array in a mixed-array file into separate files.
PC400 is designed to run natively only under the Windows OS. However, there are third-party applications available for the Mac OS that can create a virtual environment in which some Windows applications can run. Note that Campbell Scientific does not provide testing or support for these applications.
The initial version of the PC400 software must be ordered and cannot be downloaded directly. (Refer to the Ordering information area of the PC400 product page for more information.) After the software is installed, upgrades within a major revision level can be downloaded from the Downloads page. Upgrades between major revision levels require the purchase of the PC400/U upgrade.
No. This mid-level data logger support software is available for purchase and is listed in the Ordering information area of the PC400 product page.
For comparative descriptions, see the “Software Overview” brochure.