Downloads by Name


Downloads by Category


Want instant access to downloads? Log In or Register

Program Examples

CDM-VW300 Example Programs (45.4 KB) 23-05-2013


CRBasic program examples for use with the CDM-VW300 and CDM-VW305. learn more

CH201 Example Programs 1 (3 KB) 15-06-2020


Two CR1000X data logger programs that monitor the CH201. One example program uses RS-232, and the other example... learn more

COM310 Examples (5 KB) 22-04-2008


CR1000 CRBasic program examples showing COM310 data callback and voice support. learn more


CR1000X program measures the CNR4 and controls the CNF4 heater/ventilator based on environmental conditions, and monitors the CNF4... learn more


CR1000X program that uses differential terminals to measure the four radiation outputs and one excitation terminal and one... learn more


CR1000X programs that use the MSSET and MSGET commands. learn more


CR1000X programs that read continuous data and polled data and use the SET, SETNC, and GET commands. The... learn more


CR1000X program that measures the HFP01SC, performs the self-calibration, and checks for calibration validity. Refer to the manual... learn more


CR3000 program measures the Pt-100 sensor for the body temperature of the CNR4. This program requires four differential... learn more

CS110 Example programs 1 (3 kB) 05-05-2020


A CS110 weather station program and a CS110 transfer standard site calibration program. The weather station program measures... learn more

CS25 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that control the relay, measure the short circuit current for the reference and... learn more

CS26 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that control the relay, measure the short circuit current for the reference and... learn more

CS27 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that measure the short circuit current for the reference and test modules and... learn more


Example CR1000, CR3000, and CR23 datalogger programs to measure the CSAT3 three dimensional ultrasonic anemometer. The programs include... learn more


Example datalogger programs for finding the optimal SDM baud rate. These programs are used to determine the appropriate... learn more


A GRANITE 10 example program using CAN bus to query an ECU for the legislated PID values once... learn more


Three CR1000X data logger programs that read the MetSENS200 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSENS300 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSENS500 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSENS550 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSENS600 measurements and sensor status. An example program is included... learn more

PS200 Example Programs 1.1 (36.4 KB) 08-12-2014


CR1000 programming examples for use with the PS200.  The examples show how to use both SDI-12 and RS-232... learn more


Example CR1000 datalogger programs to measure a RMY81000 configured as a RMY81005 or RMY81005A. Along with the programs... learn more

SkyVUE example programs 1 (3 KB) 07-11-2019


CRBasic data logger programs for use with the default message, CS message 1. One example includes a cyclic redundancy check... learn more

SR50A example programs 1 (11 kB) 22-01-2020


CR6 and CR1000X programs that directly read each type of SR50A output (SDI-12, RS-232, RS-485), and a CR1000... learn more


CR6 and CR1000X programs that read the SR50AH SDI-12 output and control the SR50AH heater. A 107 sensor... learn more

SR50AT example programs 1 (11 kB) 22-01-2020


CR6 and CR1000X programs that directly read each type of SR50AT output (SDI-12, RS-232, RS-485), and a CR1000... learn more


CR6 and CR1000X programs that read the SR50ATH SDI-12 output and control the SR50ATH heater. The programs use... learn more


CR3000, CR1000, or CR800-series data logger program for the TX325 that sets up self-timed and random transmissions and... learn more


GRANITE-series, CR6, CR1000X, or CR300-series data logger program for the TX326 and TX325 that sets up self-timed and... learn more


Program to read 20 Hz dynamic data from two GRANITE VWIRE 305 analyzers measuring eight channels each. learn more


Two example CR1000X programs that read the WindSonic1. One program reads the sensor directly, and the other program... learn more