Similar to the GRANITE™9, the GRANITE™10 is the most computationally powerful data-acquisition device from Campbell Scientific. As an all-digital measurement and control DAQ, the GRANITE 10 is designed as the core of the data-acquisition network, integrating with all GRANITE™ measurement modules, including the VOLT 108, VOLT 116, TEMP 120, VWIRE 305, and CH400. Unlike the GRANITE 9, however, the GRANITE 10 also includes four general-purpose CAN channels. With its CAN channels, a larger 128 GB SSD, and extended temperature ranges, the GRANITE 10 is your ultimate tool for automotive testing.Read More
The GRANITE 10 enables you to perform the following:
|-NOTE-||Additional specifications are listed in the GRANITE 10 Specifications.|
|Power Requirements||9.6 to 32 Vdc (voltage input)|
|Real-Time Clock Accuracy||±3 min. per year|
|Operating Temperature Range||
|Case Material||Stainless steel 304 and aluminum 6061|
|Pulse Counters||8 (C1 to C8)|
|Data Storage Ports||
|Digital I/O||8 terminals (C1 to C8) configurable for digital input and output. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions.|
|Internet Protocols||Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS, DNS, DHCP, SLAAC, Telnet, HTTP(S), FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP|
|Communication Protocols||CAN-FD, CAN, CPI, EPI, PakBus, PakBus Encryption, SDM, SDI-12, Modbus RTU / ASCII / TCP, DNP3, custom user definable over serial, UDP, NTCIP, NMEA 0183, I2C, SPI|
|Battery-backed SRAM for CPU Usage & Final Storage||4 MB|
|Data Storage||4 MB SRAM + 128 MB NOR flash (Storage expansion of up to 16 GB with removable microSD flash memory card.)|
|Active Current Drain, Average||
|Static Vibrating-Wire Measurements||Not supported|
21.4 x 12.0 x 7.5 cm (8.4 x 4.7 x 3.0 in.)
Additional clearance required for cables and leads.
|Weight||1.2 kg (2.7 lb)|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
|TEMP120||Requires OS version 1 or greater.|
A GRANITE 10 example program using CAN-bus to query an ECU for the legislated PID values once a second. CANPortOpen(), CANWrite(), and CANRead() are used configure the CAN port, request each PID and store the requested values in CRBasic Variables. This example program can be modified to read other manufacturer specific PIDs.