The GRANITE™6 DAQ is a powerful core component for your complete data-acquisition system. The GRANITE 6 provides fast communication, low power requirements, built-in USB and Wi-Fi, modular design, and high analog input accuracy and resolution. It uses universal (U) terminals to allow a connection to virtually any sensor—analog, digital, or smart. The multipurpose DAQ is also capable of measuring static vibrating-wire measurements.Read More
The GRANITE™6 provides extreme measurement versatility, has multiple communications options, processes sensor responses to engineering units, performs calculations, generates alarms, and controls external devices. Data are stored in onboard, nonvolatile memory awaiting transfer to the end user via direct or remote access. The GRANITE™6 can generate real-time or event-driven data tables. These data can be further processed with high-level math functions and statistical summaries such as averages, standard deviations, and rainflow histograms.
|-NOTE-||Additional specifications are listed in the GRANITE 6 Specifications.|
|Pulse Counters||12 (U1 to U12)|
|Voltage Excitation Terminals||12 (U1 to U12)|
|Universal Inputs||12 individually configured inputs for analog or digital functions|
|Case Material||Stainless steel 304 and aluminum 6061|
|Operating Temperature Range||
|Data Storage Ports||
|Digital I/O||16 terminals (C1 to C4, U1 to U12) configurable for digital input and output. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions.|
|Analog Voltage Accuracy||Accuracy specifications do not include sensor or measurement noise.|
|Analog Voltage Accuracy||
|Real-Time Clock Accuracy||±3 min. per year (optional GPS correction to ±10 µs; 5.7 ppm)|
|Internet Protocols||Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, Telnet, HTTP(S), FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP|
|Communication Protocols||CPI, PakBus, PakBus Encryption, SDM, SDI-12, Modbus RTU / ASCII / TCP, DNP3, custom user definable over serial, UDP, NTCIP, NMEA 0183, I2C, SPI|
|Battery-backed SRAM for CPU Usage & Final Storage||4 MB|
|Data Storage||4 MB SRAM + 72 MB flash (Storage expansion of up to 16 GB with removable microSD flash memory card.)|
|Idle Current Drain, Average||
|Active Current Drain, Average||
|Static Vibrating-Wire Measurements||Supported|
21.4 x 12.0 x 5.0 cm (8.4 x 4.7 x 2.0 in.)
Additional clearance required for cables and leads.
|Weight||0.86 kg (1.9 lb)|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
|GRANITE TEMP 120||Requires OS version 1 or greater.|
|GRANITE VOLT 108|
|GRANITE VOLT 116|
|GRANITE VWIRE 305|
The CPI Calculator is a downloadable Microsoft Excel spreadsheet used to estimate the usage and capacity of a CPI network. The calculator provides an overview on CPI devices including the CDM-A108, CDM-A116, CDM-VW300, CDM-VW305, and the CSAT3B. The calculator can also estimate the measurement speed of the CDM-A108 and CDM-A116 based on the number of channels and measurement parameters.
The CPI Calculator is an estimation tool and will help you better understand and design CPI networks by considering the following:
Program to read 20 Hz dynamic data from two GRANITE VWIRE 305 analyzers measuring eight channels each.